ISO3082DW / ISO3088DW

Adapts or transmits signals between devices.

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component ISO3082DW and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

ISO3082DW

200 kbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16

  • 200 kbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

ISO3088DW

20 Mbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16

  • 20 Mbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation