FODM214 / FODM214A

Converts a physical quantity into a signal for a measuring circuit.

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component FODM214 and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

FODM214

AC/DC Optocoupler, Vce 80V, CTR 20-400%, SOP-4

  • AC/DC Optocoupler, Vce 80V, CTR 20-400%, SOP-4
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

FODM214A

AC/DC Optocoupler, Vce 80V, CTR 50-250%, SOP-4

  • AC/DC Optocoupler, Vce 80V, CTR 50-250%, SOP-4
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation