FPF2000 / FPF2001

Regulates, converts or monitors a circuit’s power supply.

Tutorial / documentation

Power supplies

Quick documentation & first test preparation

  1. Identify component FPF2000 and its package.
  2. Check input range, output voltage and maximum current.
  3. Use the external components and layout recommended by the manufacturer.
  4. Consult the application circuit in the linked documentation before testing.

FPF2000

Single power-distribution switcher, current limit = 50mA, blanking time = 10 ms, auto-restart time = 80 ms, ON Pin Polarity = HIGH, SOT-353

  • Single power-distribution switcher, current limit = 50mA, blanking time = 10 ms, auto-restart time = 80 ms, ON Pin Polarity = HIGH, SOT-353
  • Check input range, output voltage and maximum current.
  • Use the external components and layout recommended by the manufacturer.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

FPF2001

Single power-distribution switcher, current limit = 50mA, blanking time = 10 ms, auto-restart time = 80 ms, ON Pin Polarity = LOW, SOT-353

  • Single power-distribution switcher, current limit = 50mA, blanking time = 10 ms, auto-restart time = 80 ms, ON Pin Polarity = LOW, SOT-353
  • Check input range, output voltage and maximum current.
  • Use the external components and layout recommended by the manufacturer.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation