SiP32510DT / SiP32508DT

Regulates, converts or monitors a circuit’s power supply.

Tutorial / documentation

Power supplies

Quick documentation & first test preparation

  1. Identify component SiP32510DT and its package.
  2. Check input range, output voltage and maximum current.
  3. Use the external components and layout recommended by the manufacturer.
  4. Consult the application circuit in the linked documentation before testing.

SiP32510DT

1.2 V to 5.5 V, Slew Rate Controlled Load Switch with Discharge Circuit, TSOT23-6

  • 1.2 V to 5.5 V, Slew Rate Controlled Load Switch with Discharge Circuit, TSOT23-6
  • Check input range, output voltage and maximum current.
  • Use the external components and layout recommended by the manufacturer.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

SiP32508DT

1.1 V to 5.5 V, Slew Rate Controlled Load Switch, TSOT23-6

  • 1.1 V to 5.5 V, Slew Rate Controlled Load Switch, TSOT23-6
  • Check input range, output voltage and maximum current.
  • Use the external components and layout recommended by the manufacturer.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation