NCP1070P065 / NCP1070P100

Regulates, converts or monitors a circuit’s power supply.

Tutorial / documentation

Power supplies

Quick documentation & first test preparation

  1. Identify component NCP1070P065 and its package.
  2. Check input range, output voltage and maximum current.
  3. Use the external components and layout recommended by the manufacturer.
  4. Consult the application circuit in the linked documentation before testing.

NCP1070P065

High-Voltage Switcher for Low Power Offline SMPS, 700V Vds, 14W/7.75W, 230V/85-265V, 65kHz, 22Ohm Rds(on), 250mA Ipk, DIP-7

  • High-Voltage Switcher for Low Power Offline SMPS, 700V Vds, 14W/7.75W, 230V/85-265V, 65kHz, 22Ohm Rds(on), 250mA Ipk, DIP-7
  • Check input range, output voltage and maximum current.
  • Use the external components and layout recommended by the manufacturer.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

NCP1070P100

High-Voltage Switcher for Low Power Offline SMPS, 700V Vds, 14W/7.75W, 230V/85-265V, 100kHz, 22Ohm Rds(on), 250mA Ipk, DIP-7

  • High-Voltage Switcher for Low Power Offline SMPS, 700V Vds, 14W/7.75W, 230V/85-265V, 100kHz, 22Ohm Rds(on), 250mA Ipk, DIP-7
  • Check input range, output voltage and maximum current.
  • Use the external components and layout recommended by the manufacturer.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation