NEO-M8M / NEO-8Q

Adapts or transmits signals between devices.

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component NEO-M8M and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

NEO-M8M

GNSS Module NEO M8, VCC 2.7V to 3.6V

  • GNSS Module NEO M8, VCC 2.7V to 3.6V
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

NEO-8Q

GNSS Module NEO 8, VCC 1.65V to 3.6V

  • GNSS Module NEO 8, VCC 1.65V to 3.6V
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation