SYPD-2 / SYPD-1

Adapts or transmits signals between devices.

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component SYPD-2 and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

SYPD-2

Phase Detector, 10 to 200 MHz, 50 Ohm, Mini-Circuits TTT167

  • Phase Detector, 10 to 200 MHz, 50 Ohm, Mini-Circuits TTT167
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

SYPD-1

Phase Detector, 1 to 100 MHz, 50 Ohm, Mini-Circuits TTT167

  • Phase Detector, 1 to 100 MHz, 50 Ohm, Mini-Circuits TTT167
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation