A1365xKTTN-1 / A1365xKTTN-2

Converts a physical quantity into a signal for a measuring circuit.

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component A1365xKTTN-1 and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

A1365xKTTN-1

Programmable Linear Hall Effect Sensor, +0.6 to +1.3mV/G, SIP-4

  • Programmable Linear Hall Effect Sensor, +0.6 to +1.3mV/G, SIP-4
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

A1365xKTTN-2

Programmable Linear Hall Effect Sensor, +1.3 to +2.9mV/G, SIP-4

  • Programmable Linear Hall Effect Sensor, +1.3 to +2.9mV/G, SIP-4
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation