LM75C / LM75B

Converts a physical quantity into a signal for a measuring circuit.

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component LM75C and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

LM75C

Digital Temperature Sensor & Thermal Watchdog, SOIC-8 and VSSOP-8

  • Digital Temperature Sensor & Thermal Watchdog, SOIC-8 and VSSOP-8
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

LM75B

Digital Temperature Sensor & Thermal Watchdog with LP on I2C and bus fault timeout, SOIC-8 and VSSOP-8

  • Digital Temperature Sensor & Thermal Watchdog with LP on I2C and bus fault timeout, SOIC-8 and VSSOP-8
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation