Tutorial: W5100S-L / W6100-L

Adapts or transmits signals between devices.

W5100S-L / W6100-L

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component W5100S-L and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

W5100S-L

10/100Mb Ethernet controller with TCP/IP stack, LQFP-48

  • 10/100Mb Ethernet controller with TCP/IP stack, LQFP-48
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

W6100-L

10/100Mb Ethernet controller with TCP/IP stack, IPv4/IPv6, LQFP-48

  • 10/100Mb Ethernet controller with TCP/IP stack, IPv4/IPv6, LQFP-48
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.