Tutorial: ADM206 / ADM207

Adapts or transmits signals between devices.

ADM206 / ADM207

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component ADM206 and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

ADM206

0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 3 receivers (tx/rx: 4/3), shutdown / enable pins, DIP-24 (300 mil) / SOIC-24 / SSOP-24

  • 0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 3 receivers (tx/rx: 4/3), shutdown / enable pins, DIP-24 (300 mil) / SOIC-24 / SSOP-24
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

ADM207

0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 3 receivers (tx/rx: 5/3), DIP-24 (300 mil) / SOIC-24 / SSOP-24

  • 0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 3 receivers (tx/rx: 5/3), DIP-24 (300 mil) / SOIC-24 / SSOP-24
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.