Tutorial: ADuM7640C / ADuM7640A

Converts a physical quantity into a signal for a measuring circuit.

ADuM7640C / ADuM7640A

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component ADuM7640C and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

ADuM7640C

Low Power Six-Channel 6/0 Digital Isolator, 25Mbps 6ns, Fail-Safe High, QSOP-20

  • Low Power Six-Channel 6/0 Digital Isolator, 25Mbps 6ns, Fail-Safe High, QSOP-20
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

ADuM7640A

Low Power Six-Channel 6/0 Digital Isolator, 1Mbps 25ns, Fail-Safe High, QSOP-20

  • Low Power Six-Channel 6/0 Digital Isolator, 1Mbps 25ns, Fail-Safe High, QSOP-20
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.