Tutorial: CNY17-1 / CNY17-2

Converts a physical quantity into a signal for a measuring circuit.

CNY17-1 / CNY17-2

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component CNY17-1 and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

CNY17-1

DC Optocoupler Base Connected, Vce 70V, CTR 40-80%, Viso 5000V (RMS), DIP6

  • DC Optocoupler Base Connected, Vce 70V, CTR 40-80%, Viso 5000V (RMS), DIP6
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

CNY17-2

DC Optocoupler Base Connected, Vce 70V, CTR 63-125%, Viso 5000V (RMS), DIP6

  • DC Optocoupler Base Connected, Vce 70V, CTR 63-125%, Viso 5000V (RMS), DIP6
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.