Tutorial: HCNW2201 / HCNW2211

Converts a physical quantity into a signal for a measuring circuit.

HCNW2201 / HCNW2211

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component HCNW2201 and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

HCNW2201

Opto Coupler, 1kV/us, 50V CMR, Schmitt trigger output, WDIP-8

  • Opto Coupler, 1kV/us, 50V CMR, Schmitt trigger output, WDIP-8
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

HCNW2211

Opto Coupler, 10kV/us, 1kV CMR, Schmitt trigger output, WDIP-8

  • Opto Coupler, 10kV/us, 1kV CMR, Schmitt trigger output, WDIP-8
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.