Tutorial: ADL5542 / ADL5541

Adapts or transmits signals between devices.

ADL5542 / ADL5541

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component ADL5542 and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

ADL5542

20-6000MHz RF/IF +20dB gain block, LFCSP-8

  • 20-6000MHz RF/IF +20dB gain block, LFCSP-8
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

ADL5541

20-6000MHz RF/IF +15dB gain block, LFCSP-8

  • 20-6000MHz RF/IF +15dB gain block, LFCSP-8
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.