Tutorial: SXBP-140 / SXBP-100

Adapts or transmits signals between devices.

SXBP-140 / SXBP-100

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component SXBP-140 and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

SXBP-140

Bandpass Filter, 130 to 150 MHz, 50 Ohm, Mini-Circuits HF1139

  • Bandpass Filter, 130 to 150 MHz, 50 Ohm, Mini-Circuits HF1139
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

SXBP-100

Bandpass Filter, 87 to 117 MHz, 50 Ohm, Mini-Circuits HF1139

  • Bandpass Filter, 87 to 117 MHz, 50 Ohm, Mini-Circuits HF1139
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.