Tutorial: MAX-8C / MAX-8Q

Adapts or transmits signals between devices.

MAX-8C / MAX-8Q

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component MAX-8C and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

MAX-8C

GNSS Module MAX M8, VCC 1.65V to 3.6V

  • GNSS Module MAX M8, VCC 1.65V to 3.6V
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

MAX-8Q

GNSS Module M8, VCC 2.7V to 3.6V

  • GNSS Module M8, VCC 2.7V to 3.6V
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.