Tutorial: PAT1220-C-0DB / PAT1220-C-1DB

Adapts or transmits signals between devices.

PAT1220-C-0DB / PAT1220-C-1DB

Tutorial / documentation

Communication

Quick documentation & first test preparation

  1. Identify component PAT1220-C-0DB and its package.
  2. Identify the protocol, logic levels and each pin’s function.
  3. Check required termination and pull-up/pull-down resistors.
  4. Consult the application circuit in the linked documentation before testing.

PAT1220-C-0DB

10GHz RF Attenuator, 50ohm Matched Impedance, 0dB Attenuation, PAT1220

  • 10GHz RF Attenuator, 50ohm Matched Impedance, 0dB Attenuation, PAT1220
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

PAT1220-C-1DB

10GHz RF Attenuator, 50ohm Matched Impedance, 1dB Attenuation, PAT1220

  • 10GHz RF Attenuator, 50ohm Matched Impedance, 1dB Attenuation, PAT1220
  • Identify the protocol, logic levels and each pin’s function.
  • Check required termination and pull-up/pull-down resistors.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.