Tutorial: A1101xLH / AH452UA
Converts a physical quantity into a signal for a measuring circuit.
Sensors
Quick documentation & first test preparation
- Identify component A1101xLH and its package.
- Check the measured quantity, useful range and calibration method.
- Identify the output interface and compatible electrical levels.
- Consult the application circuit in the linked documentation before testing.
A1101xLH
Hall effect switch, unipolar (south-polarity), Bop=100G, Brp=45G, 3.8-24V supply, SOT-23W
- Hall effect switch, unipolar (south-polarity), Bop=100G, Brp=45G, 3.8-24V supply, SOT-23W
- Check the measured quantity, useful range and calibration method.
- Identify the output interface and compatible electrical levels.
- The manufacturer’s pinout and absolute limits take precedence over this page.
AH452UA
High sensitivity omnipolar Hall effect switch, Bop=±50G, Brp=±30G, TO-92S (3-pin SIP)
- High sensitivity omnipolar Hall effect switch, Bop=±50G, Brp=±30G, TO-92S (3-pin SIP)
- Check the measured quantity, useful range and calibration method.
- Identify the output interface and compatible electrical levels.
- The manufacturer’s pinout and absolute limits take precedence over this page.
Inputs and outputs must match the function described in the selected reference’s documentation.