Tutorial: A1301xLH / A1301xUA

Converts a physical quantity into a signal for a measuring circuit.

A1301xLH / A1301xUA

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component A1301xLH and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

A1301xLH

Linear Hall Effect Sensor, 2.5 mV/G, 4.5-6.0V supply, SOT-23W

  • Linear Hall Effect Sensor, 2.5 mV/G, 4.5-6.0V supply, SOT-23W
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

A1301xUA

Linear Hall Effect Sensor, 2.5 mV/G, 4.5-6.0V supply, TO-92S (3-pin SIP)

  • Linear Hall Effect Sensor, 2.5 mV/G, 4.5-6.0V supply, TO-92S (3-pin SIP)
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.