Tutorial: S5971 / S5972

Converts a physical quantity into a signal for a measuring circuit.

S5971 / S5972

Tutorial / documentation

Sensors

Quick documentation & first test preparation

  1. Identify component S5971 and its package.
  2. Check the measured quantity, useful range and calibration method.
  3. Identify the output interface and compatible electrical levels.
  4. Consult the application circuit in the linked documentation before testing.

S5971

Si PIN Photodiode, 0.1 GHz, TO-18-3

  • Si PIN Photodiode, 0.1 GHz, TO-18-3
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

S5972

Si PIN Photodiode, 0.5 GHz, TO-18-3

  • Si PIN Photodiode, 0.5 GHz, TO-18-3
  • Check the measured quantity, useful range and calibration method.
  • Identify the output interface and compatible electrical levels.
  • The manufacturer’s pinout and absolute limits take precedence over this page.
Technical documentation

Inputs and outputs must match the function described in the selected reference’s documentation.